code=eabbye
brief=%s-%s to wyjątkowo dziwny wynik - prawdopodobnie chcesz komuś dopisać bye'a. (Wpisz HUH EABBYE w linię komend, by zobaczyć szczegóły)
detail=Wynik, który wpisano jest dziwny - wygląda na to, że chciano dopisać BYE'a. Jeśli chcesz to zrobić, musisz użyć komendy PAIR aby przypisać graczom BYE'a (przeciwnik 0) przed dodaniem punktów za BYE. Jeśli tego nie zrobisz, prawdopodobnie rankingi będą źle obliczone, a ktoś dostanie BYE'a wielokrotnie. Przeczytaj sekcję Troubleshooting w manualu (użyj komendy DOC), aby zobaczyć przykłady. (Jeśli nie chodzi o wpisanie BYE'a, możesz użyć komendy EditScore aby ręcznie wpisać wynik).
type=error

code=eabspr
brief=Nie wszystkie wyniki rundy %d zostały wpisane.
detail=Nie powinno się tworzyć klasyfikacji przed wpisaniem wszystkich wyników. Plik klasyfikacji tak utworzony powinien być zignorowany.
type=error

code=eacpbadr
brief=Nie można automatycznie rozstawić rundy %d w oparciu o wyniki po rundzie %d.
detail=Możesz utworzyć rozstawienie tylko na podstawie ostatniej lub przedostatniej rundy. Wprowadź więcej wyników przed kolejną próbą rozstawienia.
type=error

code=eacpnsb
brief=Jeśli jesteś pewien, że chcesz rozstawić Rundę %d na podstawie Rundy %d, określ w pliku config.tsh parametr config session_breaks.
detail=Wygląda na to, że chcesz rostawić systemem Chew, ale program nie jest pewien czy wyjściową klasyfikacją ma być ta po ostatniej rundzie, czy po przedostatniej. Możesz rozwiązać problem dodając wartość parametru 'session_breaks' w pliku config.tsh.
type=error

code=eacprnsb
brief=Pairings after Round %d session break must be based on Round %d.
detail=After a session break, you must use the preceding round's results.  That's the definition of a session break.  You should either finish entering the results from the last round before the session, or correct the value of the session_breaks configuration variable.
type=error

code=eahuh
brief=Huh?
detail=Wprowadzony wynik wygląda na niepoprawny.
type=error

code=eallsin
brief=Wszystkie wyniki w Dywizji %s w Rundzie %d zostały wpisane.
detail=Jeśli chcesz zmienić wyniki, które zostały już wpisane, użyj komendy EditScores.
type=error

code=ealpaird
brief=Żaden gracz nie musi być rozstawiony w Rundzie %d.
detail=Jeśli widzisz tę wiadomość, powinieneś skontaktować się z Johnem Chew. Z technicznego punktu widzenia znaczy to tyle, że algorytm rozstawiania zażądał listy graczy którzy mieli być rozstawieni, a lista ta była pusta. Jeśli dywizja nie ma mniej niż dwóch graczy, ciężko sobie wyobrazić jak taka sytuacja mogła mieć miejsce.
type=error

code=eanotopp
brief=%s i %s nie grali ze sobą w Rundzie %d.
detail=Należy sprawdzić, czy wpisane zostały poprawne numery startowe graczy. Jeśli tak, może być konieczne użycie komendy PAIR, aby ręcznie poprawić rozstawienie.
type=error

code=eapbr
brief=Bad autopair line begins "autopair %s %d %d...": source round must be less than target round.
detail=In your configuration file, the first number on an autopair line is the round on whose standings the pairings will be based, and the second number is the round whose pairings need to be computed.  The first number must be less than the second number, so please edit your configuration file to fix the problem.
type=error

code=eapfail
brief=Automatyczne rozstawienie komendą "%s" nie udało się.
detail=Nie udało się rozstawić automatycznie za pomocą tej komendy. John Chew byłby zainteresowany jak udało Ci się wywołać ten komunikat.
type=error

code=eapwrr
brief=Can't autopair Round %d: next round to pair is %d.
detail=You can't generate the pairings for a round until the pairings for all preceding rounds are ready.  Ask for the earlier pairings first.
type=error

code=easa
brief=Sprawdź wynik raz jeszcze:: %d-%d=%d, a nie %d.
detail=Jeśli wprowadzono dokładnie to, co gracze na protokołach, należy zwrócić im uwagę że popełnili błąd.
type=error

code=easbad12
brief=%s was supposed to go %s.
detail=tsh is keeping track of firsts and seconds (starts and replies) because you have the configuration option "track_firsts = 1" set, but not assigning firsts and seconds because you did not set "assign_firsts = 1".  In this case, tsh uses the order in which you enter scores to determine who actually played first.  Sometimes tsh can tell by counting firsts and seconds that the wrong player went first.  If this happens a lot, you should caution the players involved.
type=error

code=eaupunk
brief=%s played player %d in round %d, but that player did not play any games.
detail=Your .t file is inconsistent, probably as a result of manual editing. Please check it carefully and correct it before trying this command again.
type=error

code=eautokoth
brief=Ignoring force_koth for automatic pairings.
detail=If you want to have KOTH pairings in the final round of automatic pairings, insert the appropriate autopair configuration commands.  Better yet, use default pairings.
type=error

code=ebadap
brief=Can't parse 'autopair %s' in %s.
detail=tsh could not understand an autopair line in its configuration file. Please consult the reference manual and correct the offending line.
type=error

code=ebadapc
brief=Niepoprawny system automatycznego rozstawienia: %s.
detail=Rozstawianie automatyczne jeszcze nie działa z niektórymi systemami (choć działa z większością). Prawdopodobnie źle wpisałeś komendę automatycznego rozstawienia (autopair), więc sprawdź dokładnie plik konfiguracji. Jeśli istnieje komenda, którą chcesz dodać do automatycznego rozstawiania, skontaktuj się z Johnem Chew.
type=error

code=ebadcfg
brief=Nie można odczytać linii pliku konfiguracji: %s.
detail=tsh nie zrozumiał powyższej linii w pliku konfiguracji i ignoruje tę linię. Jednym z częstych powodów występowania tego komunikatu są nieistniejące dywizje. tsh could not understand a line in its configuration file, and is ignoring the offending line. One common reason for this is referring to nonexistent divisions. Proszę przeczytać dokumentację i poprawić linię.
type=error

code=ebadcfgtbl
brief=Table list does not specify division, ignoring incorrect line.
detail=When you specify board-table assignments in a multi-division event, you must name each division. E.g.: config tables{'A'} = [1..10, 11, 11, 12, 12];
type=error

code=ebadcmd
brief=Nie ma takiej komendy: %s.
detail=Komenda którą wpisano jest nieznana tsh. Sprawdź, czy wpisano ją poprawnie.
type=error

code=ebadconfigbracket_order
brief=Bad value for config bracket_order: %s
detail=You have specified an unacceptable value for config bracket_order in your configuration file.  Acceptable values are 'id' and 'rating'.  This run of tsh will take place with config entry = 'id'.  Please correct your configuration file next time.
type=error

code=ebadconfigentry
brief=Bad value for config entry: %s
detail=You have specified an unacceptable value for config entry in your configuration file.  Acceptable values are 'both', 'scores' and 'spread'.  This run of tsh will take place with config entry = 'scores'.  Please correct your configuration file next time.
type=error

code=ebadconfigpairing
brief=Bad value for config pairing_system: %s
detail=You have specified an unacceptable value for config pairing_system in your configuration file.  Acceptable values are 'auto', 'basd', 'chew', 'manual' and 'nast'.  This run of tsh will take place with config pairing_system = 'auto'.  Please correct your configuration file next time.
type=error

code=ebadconfigrating
brief=Bad value for config rating_system: %s
detail=You have specified an unacceptable value for config rating_system in your configuration file.  Acceptable values are 'absp', 'nsa', 'nsa lct' and 'none'.  This run of tsh will take place with config rating_system = 'nsa'.  Please correct your configuration file next time.
type=error

code=ebadconfigrealm
brief=Bad value for config realm: %s
detail=You have specified an unacceptable value for config realm in your configuration file.  Acceptable values include 'absp', 'caspa', 'deu', 'nsa', 'sgp' and 'wespa'.  This run of tsh will take place with config pairing_system = 'nsa'.  Please correct your configuration file next time.
type=error

code=ebadconfigterms
brief=Bad value for config terminology: %s
detail=You have either specified an unacceptable value for config terminology in your configuration file ('nsa' should be safe), or your tsh installation is missing required files.  In the former case, please correct your configuration file (in almost all cases, you should not specify terminology directly, but rather use the default value for your realm); in the latter case, please run an update to obtain the necessary files.
type=error

code=ebaddiv
brief=No such division: %s.
detail=The given string was entered where a division was expected, perhaps in a prize list.  It should be changed to be the correct name of a division.
type=error

code=ebadhuh
brief=No such message code: %s.
detail=You asked for an explanation of a message but entered a nonexistent code. Please check it carefully and reenter it.
type=error

code=ebadp
brief=No such player: %d.
detail=You mistyped either a player number or division name. Please check it and reenter your command.
type=error

code=ebadp12
brief=%s was supposed to go second vs. %s in Round %s.
detail=A player either misrecorded who went first, or went first inappropriately. If the same player repeats the offence, they should be investigated.
type=error

code=ebadp12l
brief=%s should have replied in Round(s): %s.
detail=A player either misrecorded who went first, or went first inappropriately. If the same player repeats the offence, they should be investigated.
type=error

code=ebadpair
brief=#%s %s is paired to #%s %s who is paired to #%s %s.
detail=Your pairings are inconsistent and you must fix them using the 'pair' command.
type=error

code=ebadpixind
brief=Error reading photo index at line %d.  Try running updatepix.
detail=An error occurred while tsh was trying to read the index of player photos. You should either run updatepix to fetch a correct version of the index, or not specify config player_photos.
type=error

code=ebadprzf
brief=Incorrect prize specification in configuration file, missing %s in: prize %s.
detail=I could not parse your prize specification, which should contain the following fields in order: type, subtype, division, value.
type=error

code=ebadprzt
brief=Incorrect prize specification in configuration file, cannot parse "%s" at end of: prize %s.
detail=I could not parse the optional fields at the end of your prize specification, which should look like: key='value'.
type=error

code=ebadscore
brief=%s is not a valid score.
detail=Scores may currently range from -150 to 1500. If you absolutely must enter a score out of this range, you should edit the .t file directly.
type=error

code=ebadtpn
brief=Your .t file is corrupt: player #%d is listed as playing the nonexistent player #%d.
detail=You should edit the pairings for the player in question and have him/her play a legitimate player.
type=error

code=ebasd20
brief=Big Apple Showdown pairings are for 20 players, not %d.
detail=Check your .t file to make sure you have only 20 players, removing any inactive ones. If you want pairings that are similar to Big Apple Showdown pairings, but for a different number of players, please talk to John Chew.
type=error

code=ebasdfr
brief=Big Apple Showdown Final pairings are for rounds 13-17, not %d.
detail=If you want a modified version of BASD pairings, please ask John Chew.
type=error

code=ebigrd
brief=You cannot compute pairings for Round %d because config max_rounds = %d.
detail=The max_rounds configuration parameter sets the largest allowable round number.  If you need to exceed this, change your configuration.
type=error

code=eboarddiff
brief=%s and %s are playing each other but at different boards.
detail=There is an inconsistency in the assignment of players to boards.  You should never see this message.  If you do, it means that not only is your .t file corrupt, but tsh was unable to detect or correct the corruption.  Please send a copy of the bad .t file, then manually edit it to correct the problem before continuing with your tournamnet.
type=error

code=eboardfull
brief=In round %d, %s is stationed at board %d, which is already occupied by %s and %s.
detail=There is an inconsistency in the assignment of players to boards.  The most likely cause of this is a corrupt hand-edited .t file, which should be edited by hand if tsh is unable to automatically resolve the problem.  If this problem occurs spontaneously, please contact John Chew.
type=error

code=ebtabmet
brief=Bad value for "config table_method": '%s'.
detail=The only acceptable value for table_method is: 'consecutive'. Please correct your configuration.
type=error

code=eclassdiv
brief=Unknown division in "classes" command in configuration file: '%s'.
detail=You must declare divisions using the "division" command before you use the "classes" command to declare their classes.  Please correct your configuration file.
type=error

code=eclassnum
brief=Bad number in "classes" command in configuration file: '%s'.
detail=The syntax for the "classes" command consists of the word "classes", a space, the name of a previously declared division, a space, and an integer in the range [2,26].  Please correct your configuration file.
type=error

code=econfcmd
brief=Command name conflict for: %s. Some commands may not be available.
detail=This message should not appear unless you have installed your own commands. Talk to John Chew about this one.
type=error

code=econfigerr
brief=Configuration error: "%s".  Press enter (return) to exit.
detail=Your event configuration file had an error in it and tsh did not know what to do. Please check it carefully, or refer it to John Chew for correction.
type=error

code=ecopypic
brief=Can't copy photo '%s': %s.
detail=The named player photo could not be copied for the stated reason. The most common reason for this is lack of disk space.
type=error

code=ectscores
brief=Division %s has scores. Please delete them before trying to replace its players.
detail=You can delete scores using RESETEVERYTHING or TRUNCATEROUNDS.
type=error

code=edeletenotbye
brief=%s did not have a bye in round %d.  No scores deleted.
detail=Enter both player numbers and player scores when deleting a scored game.
type=error

code=edeletewasbye
brief=%s had a bye in round %d.  No scores deleted.
detail=To delete a bye, enter 0 for the player's opponent number.
type=error

code=edeletewrongpair
brief=%s and %s did not play each other in round %d.
detail=To make sure you are deleting the right scores, tsh requires that you do so in pairs according to the entered pairings.
type=error

code=edeletewrongscore
brief=%s had a score of %d, not %d.
detail=To make sure you are deleting the right scores, tsh requires that you correctly enter the scores you want to delete.
type=error

code=edeprec
brief=This command is deprecated and may not be present in the next version of tsh. Use %s instead.
detail=If you rely on this command and do not wish to see it deleted in the next version of tsh, contact John Chew right away.
type=error

code=edivbad12
brief=Firsts/seconds inconsistent for %s and %s in Round %d.
detail=tsh is keeping track of firsts and seconds (starts and replies) because you have the configuration option "track_firsts = 1" set, but it has inconsistent information about the named players.  In the .t file, if one of the players has their p12 value for this round set to 1 (they played first), the other must be 2; if one is set to 3 (they must draw), so must the other.  You should correct the situation either by editing the .t file or using the EditScores command (and its "first" and "second" subcommands), and if the problem is the result of a bug in tsh bring it to John Chew's attention.
type=error

code=edivmirror
brief=Error writing to %s, data not mirrored: %s.
detail=An unexpected error occurred copying your division's '.t' file.  Try deleting files if your disk is full.  The main copy of your data should not be affected.
type=error

code=edivpart
brief=%s has no results in Round %d, so results are provisional.
detail=The named player (and possibly others) does not have a score yet in the given round, so the results shown may change when additional scores are entered.
type=error

code=edivupdbak
brief=Cannot backup division to %s (%s).
detail=The indicated error has occurred while tsh was trying to save a backup copy of a .t file.  The most likely cause is that the backup directory either disappeared or has the wrong access permissions.  If you rerun tsh, it will try to recreate the backup directory with correct permissions.  If this does not work, try creating it manually and let John Chew know what happened.
type=error

code=edivupdcre
brief=Cannot create division file %s (%s).
detail=The indicated error has occurred while tsh was trying to create a new copy of a .t file.  The most likely cause is that the event directory either disappeared or has the wrong access permissions.  You must have permission to create new files in the event directory.
type=error

code=edivwrite
brief=Error writing to %s, data not saved: %s.
detail=An unexpected error occurred updating your division's '.t' file.  Try deleting files if your disk is full.  Remember that the previous version of the file can be found in the backup directory (usually called 'old').
type=error

code=edryapf
brief=No pairings were configured for round %d.
detail=If you are using automatic pairings, you should review the autopair instructions in your configuration file and add an instruction for the missing round. If you are using manual pairings, you should not try to do a dry run. If neither is the case, please contact John Chew.
type=error

code=edryne
brief=Dry run can't be run without overwriting existing data.
detail=To prevent you from clobbering live data, tsh will not let you do a dry run in a division that already has pairings data in the rounds you want to simulate. If you are sure you want to do a dry run, use the TRUNCATEROUNDS command to remove the existing data before trying the dry run again.
type=error

code=eduppass
brief=%s and %s have the same password.  %s will not be able to use self-service data entry.
detail=Each player has to have a unique password, used to identify them when they enter their own scores.  Please use the EditScores command to change one of the duplicate passwords.
type=error

code=efetchct
brief=Unable to obtain player roster cross-tables.com.
detail=Check your Internet connection and your cross-tables.com id.
type=error

code=efilecp
brief=Cannot copy file %s to %s (%s).
detail=The indicated error has occurred while tsh was trying to copy a file.  The most likely cause is that the target directory either disappeared or has the wrong access permissions.  You must have permission to create new files in the target directory.
type=error

code=efilecre
brief=Cannot create file %s (%s).
detail=The indicated error has occurred while tsh was trying to create a file.  The most likely cause is that the target directory either disappeared or has the wrong access permissions.  You must have permission to create new files in the target directory.
type=error

code=efilewrite
brief=Error writing to %s, data not saved: %s.
detail=An unexpected error occurred updating the named file.  Try deleting files if your disk is full.
type=error

code=egenpass
brief=I can't make a password for %s: something seems wrong with your random number generator.
detail=I have tried ten times, and each time I've generated a password that was already in use.  Please contact John Chew, and in the meantime try adding passwords by hand.
type=error

code=egrrbad
brief=%d players can't be divided into %d groups of %d or %d players.
detail=The players can't be divided into groups whose sizes are equal to either the number of rounds or the number of rounds plus one.  Please rethink your pairing strategy or choose a different number of players to place in this division.
type=error

code=egrreven
brief=Round robins take place over an odd number of rounds; %d is not an odd number.
detail=Please choose an odd number of rounds for each group's round robin schedule, to conform with what is combinatorially possible.
type=error

code=ehaspair
brief=Division %s already has pairings.
detail=Some pairings algorithms can only be run at the beginning of a tournament, before any other pairings are computed.  You should either remove the existing pairings data (e.g. using TruncateRound or UnPairRound) or choose a different pairing algorithm.
type=error

code=ehass
brief=%s already has a score (%d).
detail=You cannot enter a score for a player who already has a score. This is to prevent you from accidentally overwriting valid information. To change an existing score, use the EditScores command.  To delete a score entirely, use the DELETEscore command.
type=error

code=eifnot3
brief=Number of initial rounds must be three with config allow_gaps.
detail=This case is unimplemented due to a lack of user demand.
type=error

code=eifnotodd
brief=Number of initial rounds must be odd.
detail=If the number of initial rounds were even, the current scheme of round robin groups would have one bye in each round robin group, which would be near pessimal.  If you can think of a situation in which you absolutely must have a fixed initial schedule lasting an even number of rounds, contact me (John Chew) and I'll come up with something appropriate.
type=error

code=eifpppo
brief=Can't pair odd number of partly-paired players in round %d.
detail=Under some circumstances, tsh can set up InitFontes pairings even when some players have been assigned pairings in the first three rounds.  It does so by trying to pair players who have some assigned pairings in those rounds with each other.  It can't do so if the number of such players is odd in any round.  Please adjust the pairings so that the number is always even.
type=error

code=eifstuck
brief=Got stuck pairing partly-paired players: %s.
detail=Under some circumstances, tsh can set up InitFontes pairings even when some players have been assigned pairings in the first three rounds.  It does so by trying to pair players who have some assigned pairings in those rounds with each other.  In this case, tsh appears to have painted itself into a corner trying to do so.  You might try running the command again, as there is a random component to the pairings, or you might just finish manually pairing the partly-paired players with each other.
type=error

code=eloadxcmd
brief=Can't load external commands from %s: %s.
detail=Something went unexpectedly wrong when loading external commands.  The only user-correctable cause of this would be an aborted partial installation of tsh.  If you suspect this, try updating your copy of tsh; otherwise contact John Chew.
type=error

code=elongct
brief=Too many divisions in cross-tables.com roster, some players omitted.
detail=There were more divisions in your cross-tables.com roster than you declared in your config.tsh. You should either reduce the number of divisions in the former or increase the number in the latter.
type=error

code=elooknod
brief=No dictionaries are available.  Try the 'update-dict' command.
detail=Dictionaries for 'tsh' are obtained separately from the main distribution, because of their size.  If you have an Internet connection, use the 'update-dict' command to download them now, then rerun tsh.
type=error

code=elrrnotodd
brief=Number of round robin rounds must be odd.
detail=Round robins always take an odd number of rounds to run, please don't ask for an even number.
type=error

code=emanymatch
brief=There are more than ten players whose names match %s.
detail=If "Chew, John" is the only player in your tournament who has a J in his given name and a C in his surname, then you can refer to him as "C,J" in command lines rather than using his player number.  You must type enough of a player's name to disambiguate him from all other players.
type=error

code=emisss
brief=Some scores are still missing for Division %s in Round %d, including one for %s.
detail=You cannot enter any scores for one round before all the scores for the preceding round are entered.  You should either set the score slips for the next round aside until this round's slips are all located, or enter provisional information for this round and correct it later using EditScores.
type=error

code=emisss2
brief=Some scores are still missing for Division %s in Round %d, including one for %s.
detail=You cannot automatically generate pairings until the round on whose standings you are basing your pairings has a complete set of scores.  You should finish entering the necessary scores, or enter provisional information and correct it later using EditScores.
type=error

code=emultmatch
brief=There is more than one player whose name matches %s: %s.
detail=If "Chew, John" is the only player in your tournament who has a J in his given name and a C in his surname, then you can refer to him as "C,J" in command lines rather than using his player number.  You must type enough of a player's name to disambiguate her from all other players.
type=error

code=enastnp
brief=Cannot compute NAST pairings for %d players.
detail=NAST pairings can only be calculated for certain division sizes, as described at the NAST web site.  Please adjust the number of players in your division and try again.
type=error

code=enastsix
brief=NAST satellite tournaments must have from five to eight rounds.
detail=You must specify 'config max_rounds' to use NAST pairings, and the number of rounds you specify for a NAST satellite event must be 5, 6, 7 or 8.
type=error

code=eneed_max_rounds
brief=You must specify config max_rounds to use this command.
detail=Some commands require the 'config max_rounds' command in your configuration file, and in future its use may be mandatory for all events.  At present, Chew Pairings need it to calculate who can catch up to whom before the end of the tournament, NAST pairings need it to know which schedule to use, and the following commands and configuration settings also require it: DRYrun, FinalResults, PRiZes, config gibson = 1.
type=error

code=eneededate
brief=You must specify config event_date before using this command.
detail=The AUPAIR command needs an event date to save in its .TOU file.  Please edit your configuration settings to include one.
type=error

code=eneedename
brief=You must specify config event_name before using this command.
detail=The AUPAIR command needs an event name to save in its .TOU file.  Please edit your configuration settings to include one.
type=error

code=eneedport
brief=You cannot view the GUI without "config port".
detail=The "port" configuration option specifies the port on which your tsh GUI server will run.  Good numbers to pick are four digits and greater than 1024.
type=error

code=eneedtwitp
brief=You must specify config twitter_password before using this command.
detail=The TWEET command needs to log onto a twitter server to post its tweet.  Please edit your configuration settings to include one.
type=error

code=eneedtwitu
brief=You must specify config twitter_username before using this command.
detail=The TWEET command needs to log onto a twitter server to post its tweet.  Please edit your configuration settings to include one.
type=error

code=enoctid
brief=You must specify config cross_tables_id to use this command.
detail=You can find the cross-tables.com ID for your tournament by looking at its cross-tables.com URL. The ID is the number that follows 'u='.
type=error

code=enodivs
brief=No divisions defined in configuration file!
detail=You must enter lines of the form "division a a.t" in your config.tsh file, one per division.  tsh was unable to find any correctly formatted lines of this form.  Some older versions of tsh may give this message if they are unable to read your config.tsh file because it doesn't have the correct line-break characters.
type=error

code=enohelp
brief=There is no help topic called %s.  Enter 'help index' for a list of commands.
detail=Not all commands have detailed help yet.  If you do not find what you're looking for with the 'help' command, please consult the tsh reference manual.
type=error

code=enohtml
brief=The web page you want to see does not exist yet.
detail=Web pages are created automatically by report commands. Please use one to generate a report before asking to see it.
type=error

code=enomatch
brief=Nie ma gracza, którego nazwisko pasuje do %s.
detail=Jeśli "Chew, John" jest jedynym graczem w turnieju, który ma J w imieniu i C w nazwisku, można odnosić się do niego w linii komend jako "C,J" zamiast pisania jego numeru startowego. Należy napisać wystarczająco dużo liter nazwiska, by odróżnić gracza od innych.
type=error

code=enomod
brief=cannot load module %s: %s.
detail=The action you required cannot be performed because the named Perl library module could not be loaded.  You should try using the 'update' command to make sure that you have a complete current tsh distribution before reporting the problem to John Chew.
type=error

code=enoms
brief=%s has no score in Round %d, but opponent (#%d) does (%d).
detail=You should not see this message unless you manually edited your .t files or there is a serious bug in tsh.  If you suspect the latter, contact John Chew.
type=error

code=enoop
brief=%s has no opponent in Round %d, but someone has him/her as an opponent.
detail=You should not see this message unless you manually edited your .t files or there is a serious bug in tsh.  If you suspect the latter, contact John Chew.
type=error

code=enoos
brief=%s has a score in Round %d, but opponent (#%d) does not.
detail=You should not see this message unless you manually edited your .t files or there is a serious bug in tsh.  If you suspect the latter, contact John Chew.
type=error

code=enopairboth
brief=config pairing_system='none' and config entry='both' are incompatible, assuming entry='scores'.
detail=If players are not paired with each other (e.g., at a Sudoku competition), then it makes no sense to try to enter both the scores of the players involved in a game and their game spread.
type=error

code=enopic
brief=The photo for '%s' is indexed but missing. Try running updatepix.
detail=The photo for the named player is listed in the index of player photos, so it should be in your photo library, but it isn't. Try running updatepix to rebuild the library.
type=error

code=enopixind
brief=Can't load photo index '%s': %s. Try running updatepix.
detail=An error occurred while tsh was trying to load the index of player photos. You should either run updatepix to fetch a correct version of the index, or not specify config player_photos.
type=error

code=enopryet
brief=No pairings yet for Division %s Round %d.
detail=You have asked to see pairings for a round for which tsh does not yet have any pairings information.  If you are auto-pairing, you have not yet finished entering results from the round on which this round's pairings depend.  If not, you need to enter a manual pairing command before viewing the pairings.
type=error

code=enorank
brief=Cannot find rank for %s in round %d: rank is not yet computed.
detail=This error indicates a program bug in tsh. Please contact John Chew and tell him as much about the circumstances as possible.
type=error

code=enosuchp
brief=There is no player #%d.
detail=Check your typing, you probably mistyped the division name or player number.
type=error

code=enotabye
brief=%s did not have a bye in Round %d.
detail=You entered a single score for a player. You may only do so if the player had a bye/forfeit, in which case the score should be the player's assigned spread adjustment for that round.  If you meant to enter a bye, you should check that you entered the player number correctly, and that the player is currently paired as a bye.
type=error

code=epabr
brief=%d is too large to be a round number.
detail=Maximum round numbers are determined by config max_rounds and config max_div_rounds.  You should either correct the number you entered or adjust your configuration.
type=error

code=epabre
brief=%d is too large to be a number of repeats.
detail=Maximum round numbers (and hence number of repeats) are determined by config max_rounds and config max_div_rounds.  You should either correct the number you entered or adjust your configuration.
type=error

code=eparseload
brief=Error instantiating parser of class '%s': %s.
detail=You should not see this error message unless you have a corrupt copy of tsh. Try updating or re-downloading tsh, and if that fails, contact John Chew.
type=error

code=epfail
brief=Pairings failed.
detail=I can't compute the pairings you asked for. Try increasing the number of allowable repeats or do at least some of the pairings manually using the PAIR command.  If you asked me not to pair team members together, make sure everyone belongs to a team.
type=error

code=eplyrbv
brief=Cannot set %s for %s in Round %d to %s: bad value.
detail=I tried to set the value of some player data but was unable to do so because I noticed that the value in question was not permissible.  This error can only be caused by an unforeseen error in tsh and should be reported to John Chew as soon as possible.
type=error

code=eplyrror
brief=Cannot set %s for %s in Round %d to %s: round number is out of range.
detail=I tried to set the value of some player data but was unable to do so because the round number involved was too far in the future.  This error can only be caused by an unforeseen error in tsh and should be reported to John Chew as soon as possible.
type=error

code=eprbadr
brief=The next round of pairings that player #%d needs is %d, not %d.
detail=You can't leave gaps in the pairing schedule. If you're not sure why you're getting this message, it's possible that your tournament data doesn't read the way you think it does.  Try using the ShowscoreCard command to look at the player in question, or the ShowPairings command to look at all the pairings for the round.  If you're still not sure why you're seeing this message, please send a copy of your .t file to John Chew.
type=error

code=eresconf
brief=Players %s and %s have conflicting board reservations.
detail=You have stationed the players at different fixed boards using "config reserved", but they have to play each other.  If it is impossible for them to play each other, you'll have to manually change your pairings; otherwise one will have to play away from their home table.
type=error

code=ernos
brief=Potrzeba wyników z Rundy %d.
detail=Program nie może obliczyć rozstawienia dopóki nie wprowadzone zostaną wyniki danej rundy.
type=error

code=erotocfg
brief=No roto file defined.
detail=You must set "config rotofile" before using the ROTO command.  That option specifies the location of the rotisserie team file, and must be read before the command can list standings.
type=error

code=erotodup
brief=Team %d has a duplicate player: %s.
detail=Each player can appear on a team only once.  Please remove the duplicate entry.
type=error

code=erotoope
brief=Can't open %s: %s
detail=I was unable to open the rotofile that you specified.  Please check that the filename is specified correctly in your configuration file, that the file exists in your event folder, and is readable.
type=error

code=erotoown
brief=Team %d has two owners: %s and %s.
detail=There must only be one "owner" line in each team.  You either ran two teams together, or listed more than one owner.  Please fix the rotofile.
type=error

code=erotosiz
brief=%s has %d player(s), not %d.
detail=All teams should have the same number of players, but I have just noticed that two consecutive teams have differing numbers of players.  Please correct this.
type=error

code=erotosyn
brief=Can't make sense of: %s
detail=rotofile lines must be blank or begin with the word "owner" or "player".  Please correct this line.
type=error

code=erotounp
brief=Team %d has an unknown player: %s.
detail=Player names must be spelled exactly as in the ".t" file.  Please check the spelling of this player and correct it.
type=error

code=erpowp
brief=%s was already paired with player #%d in Round %d, is being repaired with player #%d.
detail=You should not see this message unless there is a serious bug in tsh. Please check your pairings and contact John Chew.
type=error

code=errpartp
brief=Can't add round robin pairings: last round is partly paired.
detail=If you are sure that you want to add round robin pairings to this division, either complete the last round's pairings with another command, or delete them with UnPairRound.
type=error

code=esavejson
brief=Cannot save tournament data in JSON format (%s).
detail=The indicated error has occurred while tsh was trying to save your tournament data.  Web services which rely on JSON data will not have access to current data, but tsh's internal copy of the data is intact.
type=error

code=eselpair
brief=#%s %s is paired to himself/herself.
detail=Your pairings are inconsistent and you must fix them using the 'pair' command.
type=error

code=esnop
brief=%s has a score but no opponent in Round %d.
detail=You should not see this message unless you manually edited your .t files or there is a serious bug in tsh.  If you suspect the latter, contact John Chew.
type=error

code=esnopp
brief=%s is not yet paired in Round %d.
detail=Please pair players first before trying to edit their scores.
type=error

code=esnos
brief=%s does not yet have scores in Round %d.
detail=Please enter scores first before trying to edit them.
type=error

code=espit2p
brief=Team %s has picked player %d twice.
detail=A team's picks should list each player in the division only once. Please correct your spitfile and try again.
type=error

code=espit2t
brief=There are two teams called '%s'.
detail=Each line in your spitfile should define a team with a different name. Please correct your spitfile and try again.
type=error

code=espitbp
brief=Team %s has a bad player number: %d.
detail=A team's picks must be valid player numbers. Please correct your spitfile and try again.
type=error

code=espitcfg
brief=No spit roast file defined.
detail=You must set "config spitfile" before using the SPITroast command.  That option specifies the location of the spit roast team file, and must be read before the command can list standings.
type=error

code=espitmp
brief=Team %s is missing player #%d.
detail=A team's picks must list all players in the division. Please check your spitfile and try again.
type=error

code=espitope
brief=Can't open %s: %s
detail=I was unable to open the spitfile that you specified.  Please check that the filename is specified correctly in your configuration file, that the file exists in your event folder, and is readable.
type=error

code=espitsyn
brief=Can't make sense of: %s
detail=spitfile lines must look something like: 1 2 4 5 6 7 3 8; John Chew; John's First Picks.  Please correct the offending line.
type=error

code=esubmitabsp
brief=ABSP rating submission is not yet implemented.
detail=Please ask John Chew to implement it.
type=error

code=etrruneven
brief=TeamRoundRobin currently requires teams of similar size.
detail=The TeamRoundRobin command currently only supports teams of almost equal size: the largest and smallest teams must differ by at most one player. If you need support for more varied configurations, please contact John Chew.
type=error

code=etrrunodd
brief=TeamRoundRobin currently requires an even number of teams.
detail=The TeamRoundRobin command currently only supports pairing an even number of teams. If you need support for tournaments with an odd number of teams, please contact John Chew.
type=error

code=etrrsmall
brief=TeamRoundRobin requires at least two teams.
detail=The TeamRoundRobin command pairs each player on each team with all players from all other teams, and requires at least two teams to run correctly.
type=error

code=etshtpon
brief=Cannot start tsh in server mode: %s.
detail=This message indicates that you have come across a system configuration in which tsh cannot launch in server mode. Remove the "config port" line from your config.tsh file to launch directly into interactive mode. Please report the circumstances under which you saw this message to John Chew, in as much detail as you can.
type=error

code=euplay2md
brief=The server listed more divisions than you have configured.
detail=You should check to make sure your cross-tables.com event ID is correct, and that you have the same number of divisions configured locally and on the server.  For now, any extra divisions have not been downloaded.
type=error

code=euplayget
brief=The server returned an error message (%s) instead of the expected data file.
detail=You should check to make sure your cross-tables.com event ID is correct, and that cross-table.com is up.
type=error

code=euprhas1s
brief=You can't unpair player %d in Round %d because he/she has a score.
detail=You must delete scores before deleting pairings. Use the DELETEscore command or edit the .t file.
type=error

code=euprhass
brief=You can't unpair Round %d because it has a score for %s and possibly others.
detail=You must delete all scores from a round before deleting its pairings. Use the DELETEscore command or edit the .t file.
type=error

code=euprnop
brief=There aren't any pairings yet in Division %s.
detail=You cannot delete pairings from a division which does not have them. Check which division you were trying to delete pairings from and try again.
type=error

code=euprwrr
brief=Jedyną rundą w której możesz cofnąć rozstawienie jest ostatnia, czyli Runda %d.
detail=Jeśli chcesz cofnąć rozstawienie w więcej niż jednej rundzie, cofnij najpierw w rundzie ostatniej. Jeśli masz dużo rozstawień do skasowania, możesz zmienić plik .t lub przywrócić wcześniejszą kopię z katalogu archiwów.
type=error

code=euseramb
brief=Cannot distinguish players: %s.
detail=The ratings file does not label last names and first names separately, and you have two players whose names would be identical without their comma. One of them must be renamed to earn an NSA rating.
type=error

code=euseropen
brief=Cannot open ratings file %s: %s.
detail=The necessary ratings file could not be opened for the reason given. The most likely cause is that you have not yet installed a ratings file using UPDATERATINGS.
type=error

code=iabspok
brief=Grid created.
detail=A grid file, suitable for submission to the ABSP, has been created.
type=note

code=iautopr
brief=Auto-pairing.
detail=You have triggered automatic computation of pairings as set up in your configuration file.  Pairings are computed when all of the results for the source round have been entered and the pairings for a new round are requested.
type=note

code=ibasdfok
brief=Obliczanie rozstawienia systemem BASD (finał) dla Dywizji %s w Rundzie %d na podstawie klasyfikacji po rundzie %d.
detail=Program oblicza rozstawienie systemem BASD, które mu zadano.
type=note

code=ibasdsok
brief=Obliczanie rozstawienia systemem BASD (półfinały) dla Dywizji %s w Rundzie %d na podstawie klasyfikacji po rundzie %d.
detail=Program oblicza rozstawienie systemem BASD, które mu zadano.
type=note

code=ibrackok
brief=Calculating bracket pairings for Division %s Round %d based on Round %d standings.
detail=I have begun calculating the bracket pairings you asked for.
type=note

code=ibye
brief=%s dostaje BYE'a w Rundzie %d.
detail=Because there were an odd number of players, the named player will not be paired with an opponent in this round.
type=note

code=iconnct
brief=Connecting to %s to fetch player roster.
detail=I am trying to connect to the web site to get your player roster.
type=note

code=icpok
brief=Calculating Chew pairings for Division %s Round %d based on Round %d standings.
detail=I have begun calculating the Chew pairings you asked for.
type=note

code=idebug0
brief=Debugging for '%s' is now off.
detail=You will no longer see debugging messages associated with the code you gave.
type=note

code=idebug1
brief=Debugging for '%s' is now on.
detail=You will now start seeing debugging messages associated with the code you gave.
type=note

code=idivupdok
brief=Aktualizacja %s.
detail=Zmieniono dane dotyczące danego pliku i jest on aktualizowany. Kopia poprzedniej wersji pliku będzie zapisana w folderze archiwów, zazwyczaj jest to folder 'old'.
type=note

code=idone
brief=Zrobione.
detail=Zadanie zostało wykonane przez program.
type=note

code=ienterhelp
brief=Kliknij Enter, aby uzyskać pomoc.
detail=Wprowadziłeś nieznaną komendę. Jeśli nie jesteś pewien jak używać tsh, komenda 'help' to dobry pomysł na początek.
type=note

code=ievtname
brief=Wczytany turniej: %s.
detail=Jeśli nie jest to turniej, który chcesz wczytać, zamknij tsh i wczytaj inny. Jeśli nie określisz turnieju do wczytania, tsh poszuka pliku konfiguracji o najpóźniejszej dacie modyfikacji.
type=note

code=iexratok
brief=The new rating file %s has successfully been created.
detail=You asked to export rating data. The newly created file contains your most recently downloaded ratings, updated by the results of your tournament.
type=note

code=igotct
brief=Fetched player roster.
detail=I have fetched a player roster and am about to parse it.
type=note

code=igpcok
brief=Calculating %s pairings for Division %s Round %d, based on Round %d standings, with %d repeats allowed.
detail=I have begun calculating the pairings you asked for.
type=note

code=igreenok
brief=Calculating Green pairings for Division %s Round %d based on Round %d standings.
detail=I have begun calculating the Green pairings you asked for.
type=note

code=iguelphok
brief=Calculating Guelph pairings for Division %s Round %d based on Round %d standings.
detail=I have begun calculating the Guelph pairings you asked for.
type=note

code=iifok
brief=Calculating initial pre-Fontes pairings for Division %s.
detail=I have begun calculating the pre-Fontes pairings you asked for.
type=note

code=ikothok
brief=Obliczanie rozstawienia duńczykiem dla dywizji %s w Rundzie %d na podstawie klasyfikacji po Rundzie %d. Dopuszczalna liczba powtórzeń: %d.
detail=Program oblicza rozstawienie duńczykiem, które mu zadano.
type=note

code=iloadcfg
brief=Wczytywanie pliku konfiguracji %s.
detail=Jeśli nie wskazano pliku konfiguracji przy uruchomieniu tsh, program wybierze ze swojego katalogu plik o najpóźniejszej dacie modyfikacji.
type=note

code=iloaddiv
brief=Wczytywanie Dywizji %s.
detail=tsh próbuje wczytać powyższą dywizję. Jeśli nie widzisz kolejnych wiadomości, to znaczy że program poprawnie wczytał plik dywizji (z rozszerzeniem .t).
type=note

code=imissingnot
brief=Wszystkie wyniki zostały wpisane, żadnych nie brakuje.
detail=Nie trzeba szukać więcej wyników do wpisania, ale można użyć komendy CRS, aby wyświetlić tabelę do sprawdzenia wyników.
type=note

code=inastok
brief=Calculating NAST pairings for Division %s.
detail=I have begun calculating the NAST pairings you asked for.
type=note

code=insok
brief=Obliczanie rozstawienia systemem szwajcarskim dla Dywizji %s w Rundzie %d na podstawie klasyfikacji po Rundzie %d. Dozwolone powtórzenia: %d.
detail=Program oblicza rozstawienie szwajcarem, które mu zadano.
type=note

code=inullok
brief=No additional pairings needed to be computed.
detail=You asked for pairings to be computed, but after checking for byes and possibly Gibsonization, nothing needed to be done.
type=note

code=iodddiv
brief=Nieparzysta liczba aktywnych graczy (%d) w Dywizji %s.
detail=Jeśli liczba graczy w dywizji jest nieparzysta, jeden z nich będzie musiał otrzymać bye'a. Jeśli w turnieju występują dwie dywizje nieparzyste, może warto przenieść gracza z jednej do drugiej, żeby wyrównać obie.
type=note

code=ip1324ok
brief=Calculating 1-3 2-4 pairings for Division %s Round %d based on Round %d standings with %d repeats allowed.
detail=I have begun calculating the 1-3 2-4 pairings you asked for.
type=note

code=ippswok
brief=Calculating Swiss pairings for Division %s Round %d based on Round %d standings with %d repeats allowed.
detail=I have begun calculating the Swiss pairings you asked for.
type=note

code=ipreswok
brief=Calculating Swiss pairings for Division %s Round %d based on Round %d standings with %d repeats allowed.
detail=I have begun calculating the Swiss pairings you asked for.
type=note

code=iprwasp
brief=%s used to be paired to %s.
detail=You've asked for the pairings for the first named player to be changed, and I am telling you to whom they used to be paired in case you want to undo the change.
type=note

code=iquit
brief=tsh kończy pracę.
detail=Wydano polecenie zamknięcia tsh. Jeśli chcesz zrobić coś jeszcze, uruchom program ponownie.
type=note

code=irandok
brief=Dodawanie losowych wyników do gier w Dywizji %s.
detail=tsh dostał polecenie dodania losowych wyników. Jeśli chcesz je usunąć, musisz albo przywrócić zarchiwizowaną wersję pliku .t, albo edytować go ręcznie.
type=note

code=irecomprank
brief=Recomputing Round %d rankings for division %s.
detail=Recomputing rankings for many rounds can take a lot of time. If you see this message too often, please let John Chew know the circumstances.
type=note

code=irecomprat
brief=Recomputing Round %d ratings for division %s.
detail=Recomputing ratings for many rounds can take a lot of time. If you see this message too often, please let John Chew know the circumstances.
type=note

code=irpok
brief=Calculating random pairings for Division %s Round %d, assigning a bye if necessary based on Round %d standings, with %d repeats allowed.
detail=I have begun calculating the random pairings you asked for.
type=note

code=irratok
brief=Computing and saving, but not displaying, ratings for round %d.
detail=If you ask for multiple rounds of ratings, only the last one is displayed, although all are saved in reports.
type=note

code=irrcok
brief=Calculating round robin pairings for Division %s.
detail=I have begun calculating the round robin pairings you asked for, using a modified Berger schedule.
type=note

code=irrtok
brief=Calculating precomputed round robin pairings for Division %s (multiple=%d).
detail=I have begun calculating the round robin pairings you asked for.  I know am using a precomputed round robin schedule built into tsh.
type=note

code=irsem
brief=Avoiding pairing players from the same team this round.
detail=Because you have specified exagony or initial_exagony in your configuration file, I will not pair players from the same team (as specified in the "team" extension field in your .t file) this round.
type=note

code=isubmitnsa
brief=Submitting ratings data for division(s) %s.
detail=Check config division_rating_system{divname} if any divisions are missing, or set config rating_system if you did not want NSA ratings.
type=note

code=iswok
brief=Calculating Swiss pairings for Division %s Round %d based on Round %d standings with %d repeats allowed.
detail=I have begun calculating the Swiss pairings you asked for.
type=note

code=itestmsg
brief=Test Message
detail=This message is used to test the UserMessage.pm module
type=note

code=itrrok
brief=Calculating team round robin pairings for Division %s.
detail=I have begun calculating the team round robin pairings you asked for.
type=note

code=itruncs
brief=Data for Division %s has been truncated to %s rounds.
detail=As per your request, the division data has been truncated. To recover it, look through the journalled files in the 'old' subdirectory.
type=note

code=itweetok
brief=You tweeted: %s.
detail=You sent a message to the twitter.com twitterfeed that you configured, as a result of manually or automatically running the TWEET command.
type=note

code=iuplayok
brief=Player roster updated.
detail=I have successfully updated your player roster from cross-tables.com.
type=note

code=iupr1bad
brief=%s nie miał(a) przeciwnika w Rundzie %d.
detail=Programowi zadano usunięcie rozstawienia dla tego gracza w danej rundzie, ale nie miał od przydzielonego przeciwnika. Nie trzeba podejmować dalszych akcji.
type=note

code=iupr1ok
brief=... rozstawienie %d z %d usunięte.
detail=Udało się usunąć rozstawienie. Nie trzeba podejmować dalszych akcji, chyba że nie chciałeś usuwać rozstawienia - w tym wypadku należy przywrócić zarchiwizowany plik .t.
type=note

code=iuprok
brief=Usuwanie rozstawienia dla Dywizji %s w Rundzie %d.
detail=You are successfully deleting the pairings you asked for.  No further action is required on your part, unless you didn't mean to delete the pairings, in which case you should recover the appropriate journalled .t file.
type=note

code=iwelcome
brief=Witamy w wersji %s tsh.
detail=Ten komunikat informuje jakiej wersji tsh używasz. Aby uaktualnić program do najnowszej wersji, użyj komendy 'update' (wymagane połączenie z Internetem).
type=note

code=warnhied
brief=You have asked for HTML files in your event directory together with player photos, but only the HTML files in your web (html) directory will have working photos.
detail=config player_photos and config html_in_event_directory are currently incompatible.  Remove one if you do not wish to see this message.
type=warning

code=wentryabsp
brief="config entry='absp'" is deprecated.  Please use "config entry='spread'".
detail=Spread-based entry is no longer universal at ABSP tournaments, so the value of the configuration parameter has been changed, and the old value will be unacceptable in future.
type=warning

code=wentrynsa
brief="config entry='nsa'" is deprecated.  Please use "config entry='scores'".
detail=Scores-based entry is not exclusive to the NSA, so the value of this configuration parameter has been changed, and the old value will be unacceptable in future.
type=warning

code=wevalarg
brief=EVAL arguments don't match: '%s' vs. '%s'.
detail=You should never see this message. If you do, please contact John Chew and describe to him the circumstances under which it appeared.
type=warning

code=wlowscore
brief=%d is a suspiciously low score, but has been accepted.
detail=Two-digit scores are uncommon, and may be entered when a digit is omitted from a three-digit score. Please check your data entry and use the EditScores command to correct any errors.
type=warning

code=wmanpair
brief="config manual_pairings = 1" is deprecated.  Please use "config pairing_system='manual'".
detail=The number of different pairing systems is gradually increasing, and we want to minimize the number of different configuration variables it is necssary to support. The old style configuration of manual pairings will become unacceptable in future, so please stop using it now.
type=warning

code=wprzprov
brief=%s has no results in Round %d, so prize assignments are provisional.
detail=The named player (and possibly others) does not have a score yet in the given round, so the prize assignments displayed may change by the time all results are in.
type=warning

code=wsetassignfirsts
brief=Config entry = 'spread' overrides config assign_firsts = 0.
detail=Spread data entry mode requires that you assign starts and replies to players, as this information is not accepted when scores are entered.  Your configuration file is inconsistent and one line must therefore be ignored.  If you do not wish to see this warning in future, please correct your configuration file.
type=warning

code=wsettrackfirsts
brief=Config entry = 'spread' overrides config track_firsts = 0.
detail=Spread data entry mode requires that you track starts and replies to players, as this information is not accepted when scores are entered.  Your configuration file is inconsistent and one line must therefore be ignored.  If you do not wish to see this warning in future, please correct your configuration file.
type=warning

code=wsubmitnone
brief=Not submitting ratings for Division %s.
detail=Please set config division_rating_system{divname} or rating_system to something other than 'none' and rerun tsh before trying this again, if you really want to rate this division.
type=warning

code=wtruncf
brief=No data needed to be truncated, nothing was done.
detail=You asked for division data to be truncated after a certain round, but no data had been entered or generated past that round, so no changes were made.
type=warning

code=wtweettrunc
brief=Your tweet was truncated to 140 characters.
detail=Twitter.com imposes a 140-character maximum on tweets, truncating anything over that limit. You should ask for less information to be tweeted.
type=warning

code=wuserexp
brief=%s has an expired NASPA membership.
detail=You will not be able to SUBMIT ratings data for this tournament before this membership is renewed.
type=warning

code=wuserexp7
brief=%s has a NASPA membership that will expire within a week.
detail=You will not be able to SUBMIT ratings data if this membership expires before the end of your tournament.
type=warning

code=wusernotm
brief=%s is not a rated NASPA member.
detail=You will not be able to SUBMIT ratings data for this tournament before this player purchases a NASPA membership.  If this player is an unrated member, you may disregard this message.
type=warning

code=wusersusp
brief=%s has a suspended NASPA membership.
detail=You will not be able to SUBMIT ratings data for this tournament because this player's membership is under suspension.  See http://www.scrabbleplayers.org/w/Players_under_suspension for details.
type=warning

code=wuserunr
brief=%s is rated %d in the .t file, but is not in the rating list.
detail=Check the spelling of the player's name; their original rating remains in the .t file.
type=warning

code=wwant_prize_bands
brief=You should specify config prize_bands to use this command.
detail=In order to calculate Chew Pairings or do Gibsonization checking, tsh needs to know which final rankings are equivalent, which you should specify using the 'config prize_bands' command in your configuration file.  To say that ranks 1 and 2 are equivalent for Division A, as are 3-10, use the line: config prize_bands{'A'} = [2,10].  If you don't do this, tsh will assume a value of [number of players divided by four] for your division: all that matters to players is whether or not they finish in the top quarter.
type=warning
